Page 19 - NEXEDGE-Ability

14-character alphanumeric aliases & backlit dot matrix LCD
7-segment & 2-digit LED
136-174 MHz (NX-700H/700)
136-174 MHz (NX-740H)
450-520 MHz, 400-470 MHz, 380-400 MHz (NX-800H/800)
400-470 MHz, 450-520 MHz (NX-840H)
RX: 851-870 MHz;
TX: 806-825 MHz / 851-870 MHz (NX-900)
—
RX: 935-941 MHz,
TX: 896-902, 935-941 MHz (NX-901)
—
45-10 W: 40-10W for 490-512 MHz, 35-10 W for 512-520 MHz (NX-800H) 30-1 W: 25-1 W for 490-520 MHz (NX-800)
45-25-5 W (NX-840H)
15-5 W (NX-901)
—
512 /128
32/2
NXDN & FM
NXDN & FM
AMBE+2TM
AMBE+2TM
Fleetsync, MDC-1200, QT/DQT, DTMF, 2-Tone
Fleetsync, MDC-1200, QT/DQT, DTMF, 2-Tone
Type-C Gen1 & Gen2
Type-D
—
—
Optionally available
Optionally available
IP54 (Radio) / IP55 (Head)
IP54
1234
Base-repeater Optional Units
IP Network Connector for the NXR-710/810 Series – KTI-3
The Conventional IP Network feature is available for NXR-710/810 repeaters with the Network Interface Unit KTI-3.
Telephone Interface Adapter for the NXR-5700/5800/5900 Series – KTI-4
The KTI-4 Telephone Interconnect Adapter adds telephone system connectivity to the NXR-5700/5800/5900 based trunking system with an analog telephone patch, such as the Zetron M30, M735 or others. It is ideal for customers with intentions to enhance the flexibility of their networks by connecting their trunking system to a telephone line.
Multipurpose Network / Interface Box – KTI-5*
*KTI-5 is a hardware device only, requires appropriate firmware.
KTI-3
Network Interface Unit
KTI-4
Telephone Interconnect Adapter
KTI-5
Multipurpose Network / Interface Box
NEXEDGE Digital & FM Mobile Radio
NX-700H/800H NX-700/800/900/901
NEXEDGE Digital & FM Mobile Radio
NX-740H/840H
Multiple Configurations
30-1 W (NX-700) 50-10 W (NX-700H)
15-5 W (NX-900)
50-25-5 W (NX-740H)
—
The NX-5700(B)/5800(B)/5900(B) mobile radios allow users to create a variety of configurations to suit diverse requirements by combining different options.
1. Single Remote Control Head x Single RF Deck The detachable front control panel of the radio is used as a Remote Control Head.
2. Single Remote Control Head x Multi RF Decks Operate multiple radios as if they were one by adding an RF Deck.
3. Dual Remote Control Heads x Single RF Decks One controller can be mounted on the dashboard, with the other at the rear.
4. Dual Remote Control Heads x Multi RF Decks The convenience of a dual control head added to multiple RF decks (3 maximum) configuration. Two operators can control 2 radios from separate control heads.
19